When a machine stops because a part has failed, the fastest path to a replacement usually starts with a clear request for quote (RFQ). A machine shop needs more than a photo and an urgent deadline: it needs enough information to understand what the part does, how it fits, what it is made from, and when you need it. Gathering those details early can prevent avoidable questions while the equipment is down.
This guide explains what to send for emergency replacement part machining, including what to do when a drawing is missing or the damaged part is the only sample available.
Start with the part's function and the urgency
Tell the shop which component failed, what the equipment does, and how the part interfaces with neighboring components. A short description such as “this shaft carries a pulley and fits into two existing bearings” is more useful than a part name alone. Include the original part number or equipment model if you have it, but do not assume a shop can determine the geometry from a number.
Explain the nature of the failure and whether the replacement must match the original or can be adapted. For example, a worn bearing journal may need to fit an existing bearing, while a non-mating outside surface may allow more flexibility. Marking that distinction helps the shop focus on the features that matter.
Also state whether the machine is already down, your desired completion date, and the date and time the part must arrive at your facility. These are different deadlines. Shipping, pickup, material availability, and approval time can all affect the schedule. Ask the shop to confirm feasibility rather than assuming an emergency request can be completed by a particular date.
Send the best available drawing and CAD file
Engineering drawings
A current, legible engineering drawing is usually the most useful document for quoting. Send the complete drawing, including all sheets, revision level, dimensions, tolerances, material, finish requirements, and notes. If an older drawing is the only one available, say so and identify any known changes to the part.
The drawing typically serves as the controlling specification. A CAD model can clarify shape, but it may not contain the tolerances, threads, finishes, or other requirements shown on the drawing. If the drawing and model disagree, identify the conflict and ask for clarification before work begins. Do not rely on the shop to guess which version is correct.
CAD files
When available, include a STEP file or another CAD format the shop can review. A model can make complex geometry easier to understand and help the shop assess how the part might be machined. Include the drawing with the model rather than treating the model as a substitute for the complete specification.
If you have only a sketch, label the units, overall dimensions, hole locations, thread information, and any features that must fit existing components. Identify which measurements are confirmed and which are estimates. A rough sketch can start a conversation, but the shop may need additional information before it can quote or make the part.
Provide a sample and photos when documentation is incomplete
A physical sample can help explain an undocumented part, especially when the shape is difficult to describe. Ask the shop before shipping it, and explain whether the sample is intact, worn, bent, cracked, or missing material. A damaged part may show the general shape without preserving the dimensions needed for a proper fit.
Good photos support the sample or drawing. Photograph the part from several angles, show both ends, and include close-ups of threads, keyways, holes, worn areas, and fracture surfaces. Place a ruler or other known reference in the image for scale, but do not treat a photo as a substitute for a measured dimension. Photos of the mating assembly can also explain how the part sits in the machine.
If the sample has been exposed to oil, chemicals, or other contamination, tell the shop before sending it and follow its instructions for handling and packaging. Protect the sample in transit, particularly if a fragile feature is important to understanding the original geometry.
Separate original dimensions from damage
Do not assume that measuring a failed component reveals its original size. A worn shaft may be undersized; a bent component may no longer show its intended alignment; a broken edge may hide a shoulder or radius. Where possible, provide dimensions from an undamaged mating part, an original drawing, or a verified spare. Label their source so the shop knows what can be trusted.
If no reliable specification exists, discuss what information is needed to establish the replacement dimensions. Measurements from a sample, photos, or mating components may help, but the customer should confirm the intended fit and approve any assumptions before manufacturing.
Identify material and any acceptable alternatives
Specify the material grade and condition if known, rather than using a broad description such as “steel” or “plastic.” Include any required heat treatment, hardness, coating, or other material-related notes from the original specification. These details can affect machinability, part performance, availability, and lead time.
If the material is unknown, say that explicitly. Explain the part's operating conditions, such as exposure to moisture, temperature, wear, or chemicals, and provide any markings or documentation that may help identify it. Appearance alone is not a reliable material specification.
Let the shop know whether an alternative material is acceptable, but identify who must approve a substitution. A readily available material is not necessarily suitable for the load, environment, or mating parts. The customer should evaluate and authorize any change before the replacement is made.
Mark critical dimensions, tolerances, and surface finish
Not every surface on a replacement part has the same effect on fit and function. Identify bearing seats, shaft diameters, locating shoulders, hole patterns, sealing surfaces, and threads that must interface with existing components. Provide the relevant dimensions and tolerances from the drawing, and describe the mating parts where useful.
Avoid simply labeling every feature “critical” or requesting the tightest possible tolerance. Unnecessarily restrictive requirements can add time and cost. Conversely, leaving a critical fit unspecified can result in a part that does not assemble or function properly. If you do not know the required tolerance, flag the feature and discuss the available information with the shop rather than inventing a value.
Include surface finish requirements where they matter, such as a sealing or bearing surface. Distinguish a specified surface finish from cosmetic expectations, and call out burr removal, edge breaks, or other finishing notes that affect assembly or handling. If a particular surface must not be altered, identify it clearly.
State quantity and consider prototype versus production needs
Give the shop the quantity needed now and indicate whether additional parts may be needed later. One replacement may restore the machine, but ordering a spare could reduce exposure to a repeat failure. Balance that possibility against the immediate budget, available material, and the need to confirm the design first.
If the replacement design is uncertain, explain whether the first part is intended as a prototype or trial fit. A trial part can help reveal fit or assembly issues before more parts are ordered, but allow time for inspection, testing, feedback, and any revision. Agree on who will approve the design after the trial.
For production quantities, tell the shop the expected total quantity, release schedule, and whether the design is stable. Repeat orders may justify different planning from a one-off repair. Do not assume a prototype price or lead time will scale directly to a larger order; ask for pricing and timing for the quantities you are considering.
Include inspection requirements and special notes
Tell the shop how the part will be accepted. Identify dimensions or features that need particular attention and provide any customer-required inspection documentation or acceptance criteria with the RFQ. If the customer requires a particular standard, certification, or report, state that requirement as part of the request and ask the shop whether it can meet it. Do not wait until the part is ready to ship to introduce documentation requirements.
Special notes can be just as important as the drawing. Include assembly constraints, thread identification, required marking, deburring instructions, packaging needs, and any features that must align with existing components. If a repair involves several mating pieces, identify which part is being quoted and which components are supplied only for reference.
Finally, name a technical contact who can answer fit and design questions, as well as the purchasing contact who can approve the quote. During a shutdown, an unanswered clarification or delayed purchase order can consume time that a realistic schedule needs.
Emergency replacement part RFQ checklist
Before sending your request, gather as many of the following as you can. If an item is unknown, mark it as unknown instead of leaving the shop to assume.
- Part and application: Part name or number, equipment model, function, failure description, and mating components.
- Drawing: Complete drawing and revision, including dimensions, tolerances, notes, and any known discrepancies.
- CAD file: STEP file or another available model, supplied alongside the drawing.
- Sample and photos: Condition of the physical sample, views of the part and assembly, and close-ups of damaged or critical features.
- Material: Grade, condition, treatment, or coating if known, plus any alternatives you are willing to evaluate.
- Quantity: Number needed immediately, possible spares, and any expected follow-on production.
- Critical requirements: Fit dimensions, tolerances, threads, surface finish, and features that must match existing components.
- Inspection: Acceptance criteria and any customer-required documentation, standards, or certifications to be reviewed for feasibility.
- Timing: Desired completion date, required delivery date and time, destination, and whether pickup is an option.
- Special notes and contacts: Assembly constraints, approved substitutions, packaging instructions, and people authorized to answer questions and approve the order.
What to do if information is missing
Send what you have rather than delaying the initial conversation until every detail is perfect. Clearly distinguish confirmed requirements from estimates, and list the information you are still trying to obtain. The shop can then identify the gaps that matter most to the quote and discuss whether the proposed timing is realistic.
Before authorizing work, resolve open questions about the controlling revision, material, fit, inspection, and delivery. A fast response is useful, but an undocumented assumption that produces a part that will not fit can prolong the shutdown.
Request a machining quote
If you have an active replacement-part project, send your files and project requirements to Anco Precision for review and request a machining quote. Include a drawing or STEP file when available, the material, quantity, tolerances or other critical requirements, and required delivery date. Add photos or details about a physical sample if they will help explain the part, and identify anything that still needs confirmation.
Ready to Request a CNC Machining Quote?
If you have an active machining project, send Anco Precision your drawing or STEP/CAD file when available, along with the material, quantity, critical requirements, and desired delivery date. Request a CNC machining quote so the project can be reviewed for pricing.